Home » Analog Matrix » Analog Matrix MS-AM

Features

  • Microprocessor‐Based, Full Cross‐Point Video Matrix
  • Modularization Design Supports Up To 256  Cameras And 32 Monitors In Each Bay
  • Control Up To 50,000 Cameras And 512  Monitors On Base Of System Extension.
  • User Manual And Quick‐ Guides Provide System  Wiring And Configuration Details
  • UTP,RS‐422 COM Ports,RS‐232 Full‐Duplex Ports  Available On The CPU
  • System Diagnostic Leds Displayed On Front Panel
  • Logical Camera Selection And Priority Level Operation & Configuration In Matrix Software
  • Multiplexer And DVR Control Using The Keyboard
  • Built‐In Video Loss Detection
  • Windows‐Based System Management Software, Includes Multilingual Menus And On‐Screen Help
  • Factory Tested Prepackaged System Configuration And Quick‐Guide Manual.
  • Including ASCII Data, DVR, PTZ, Network, Etc. Protocol
  • Powerful Macro Programming
  • Can Communicate With Other Popular Matrix Switcher
  • Can Communicate With optional DVRs
  • Network for communication singal

Part Number

MS-AM Series Analog Matrix

Documentation

Specifications

Communication RS-422, RS-485, RS-232, TCP/IP
Baud rate 19200 bits/s、9600 bits/s、4800 bits/s、2400 bits/s etc.
Interface RS-422 RJ45 connector ( full duplex ) RS-232 RJ45 connector RS-485 3-pin3.81 connector(semi-duplex)
System configuration
System User 255
System capacity Main matrix bay: 256ch input/32ch output Maximum input: 304ch input /8ch output Maximum after extension:50000ch output /512ch output Maximum after extension:50000ch output /512ch output
Alarm capacity 50000
On-screen display Camera title: 32 character 16 lines, 42 row
Character English / Latin / Cyrillic
Power-off memory time 10year
Video
Video input 1Vp-p/75Ω Composite signal
Video output 1Vp-p/75ΩComposite signal
Signal to noise ratio >60dB ( unweighted ) >70dB ( weighted )
Channel bandwidth 5Hz~8MHz(1Vp-pwith filter)20MHz(1Vp-p,-3dBwithout filter)65MHz(20mVp-p,-3dBwithout filter)
Insertion gain <0.2dB
Differential gain <1.0%
Differential phase <1.1°
Amplitude-frequency characteristics <1.0dB(5.8MHz)
Adjacent Channel Crosstalk <-55dB(PAL: 4.43MHz/NTSC: 3.58MHz)
Adjacent channel isolation >50dB(PAL: 4.43MHz/NTSC: 3.58MHz)
Line Time Waveform Distortion <1.0%
Typical switching time 20ms(Typical)
Electrical Characteristics
Power Supply 100~240VAC 50/60HzAdaptive
Power consumption 80W
Mechanical Specifications
Weight 27KG(Full capacity)
Installation dimension 430mm(Width)×222.5mm(Depth)×356mm(8U) height)
Rack 19’’ EIA standard rack
Environmental specifications
Operating temperature -10~+55℃
Operating Humidity 0~90%RH(No condensation)